Compact design, easy to install
The body of the outdoor device has a thickness of 330 mm, meaning it can mount in small areas. The product line has a power range from 4.0Hp to 9Hp, making it very suitable for residential ventures and small offices. The power supply for outdoor units is a single-phase (VKM) and a three-phase (YKM) power supply.
Feature
- The outdoor unit will also work until the outdoor temperature exceeds 52oC [125oF]. As a result, the outdoor machine still operates well in the summer.
- Super silent features allow the system to work with incredibly low noise. This functionality can install according to the needs of the consumer.
Easy to transport and install in small spaces
The height of the outdoor unit significantly reduced. Compact design suitable for narrow spaces such as housing projects or small offices.
Advantages of the PUMY-CP140VKM.TH (-BS)
An outdoor unit can connect up to 12 indoor units. Even when multiple indoor units are installing in more than one room, one outdoor unit can still connect more than one indoor unit.
Flexible piping installation
Mitsubishi Electric uses a 2-piping system for solvent piping, reducing the number of pipes and joints.
Many pre-eminent features
1. The device can still operate when the ambient temperature reaches 52 ° C [125 ° F].
+ New inverter technology helps board devices to still operate at ambient temperatures up to 52 ° C [125oF].
+ Efficiency is still good even when installed in narrow spaces or areas with no ventilation.
2. Super quiet mode
The model 1 fan outdoor unit has four running modes: 2 super quiet modes, 2 "low noise" modes, so you can easily choose the model that suits the needs of customers. The noise level of the outdoor unit can be set depending on the building type, for residential noise areas is an issue.
* The decrease in cooling capacity differs in each mode.
* PAC-SC36NA-E is required to enable this feature.
* Function only works during cooling.
3. Static pillar up to 30Pa
The static pressure of the outdoor unit fan can be set up to 30Pa, allowing the outdoor unit to install in balconies in tall buildings or near louver locations.
* Except for Model P175 to P225YKM.
* To set static pressure for Model V (Y) VKM4, an optional device (PAC-SJ71FM-E) is required.
* The noise level increases when using this function.
Specifications
